An accurate organic solar cell parameters extraction approach based on the illuminated I-V characteristics for double diode modeling

On the Performance of the Two-Diode Model for Photovoltaic Cells Under Indoor Artificial Lighting

“…As a results, the methods selected are those proposed by Ishaque et al [34], [36], Maoucha et al [37], Abdulal et al [32], Babu and Gurjar [35], Hejri et al [33], as well as Gbadega-Peter and Saha [38]. Each method is briefly described in the following subsections, and key information is summarized in Table 1.…”

“…Maoucha et al [37] introduce a parameter estimation method based on a measured I-V curve. Similarly to [34], the seven model parameters are reduced to five by assuming the diodes' ideality factors to be constant (i.e.…”

Optimisation-based parameter estimation of photovoltaic modules

“…Nevertheless, some publications available in the literature consider extracting PV module parameters from datasheet information supplied by the manufacturer. Analytical methods are proposed to express equivalent circuit parameters in terms of performance characteristics of the PV module (Farivar and Asaei, 2011;Chatterjee et al, 2011;Lo Brano et al, 2010;Ahmad et al, 2012;Cubas et al, 2013;Siddique et al, 2013;Sera et al, 2007;Chenni et al, 2007;Chan and Phang, 1987;Maoucha et al, 2012;Phang et al, 1984;Jia et al, 1995;Ortiz-Conde et al, 2006;de Blas et al, 2002;Bouzidi et al, 2007;Chan et al, 1986;Hejri et al, 2016). Accordingly, equivalent circuit parameters are estimated if module performance is known under some operating conditions with some simplifying assumptions.…”

“…Such performance could be obtained from the manufacturer supplied datasheet of the module (Farivar and Asaei, 2011;Chatterjee et al, 2011;Lo Brano et al, 2010;Ahmad et al, 2012;Cubas et al, 2013;Siddique et al, 2013;Sera et al, 2007;Chenni et al, 2007) or from experimental measurements (Chenni et al, 2007;Chan and Phang, 1987;Maoucha et al, 2012;Phang et al, 1984;Jia et al, 1995;Ortiz-Conde et al, 2006;de Blas et al, 2002;Bouzidi et al, 2007;Chan et al, 1986). The mathematical expressions of module parameters are usually nonlinear and require iterative numerical solutions (Chatterjee et al, 2011;Lo Brano et al, 2010;Siddique et al, 2013;Sera et al, 2007;Chenni et al, 2007;Chan and Phang, 1987;Maoucha et al, 2012;Ortiz-Conde et al, 2006;Bouzidi et al, 2007); however, certain assumptions can enable the separation of variables and allow direct solution to identify the parameters (Farivar and Asaei, 2011;Ahmad et al, 2012;Cubas et al, 2013;Phang et al, 1984;Jia et al, 1995;de Blas et al, 2002;Chan et al, 1986). Although most of the work reported in literature considers the single-diode model of PV cells, a few publications are concerned with parameter estimation of the double-diode equivalent circuit Chan and Phang, 1987;Maoucha et al, 2012).…”

“…The mathematical expressions of module parameters are usually nonlinear and require iterative numerical solutions (Chatterjee et al, 2011;Lo Brano et al, 2010;Siddique et al, 2013;Sera et al, 2007;Chenni et al, 2007;Chan and Phang, 1987;Maoucha et al, 2012;Ortiz-Conde et al, 2006;Bouzidi et al, 2007); however, certain assumptions can enable the separation of variables and allow direct solution to identify the parameters (Farivar and Asaei, 2011;Ahmad et al, 2012;Cubas et al, 2013;Phang et al, 1984;Jia et al, 1995;de Blas et al, 2002;Chan et al, 1986). Although most of the work reported in literature considers the single-diode model of PV cells, a few publications are concerned with parameter estimation of the double-diode equivalent circuit Chan and Phang, 1987;Maoucha et al, 2012). In Hejri et al (2016), open-circuit voltage, short-circuit current and voltage and current at maximum power point are used to provide an initial point that guarantees convergence of analytical estimation routine.…”