This patient series reports the outcomes of CAD/CAM prosthetic reconstructions in patients with cleft lip and palate (n = 9, aged 27 to 76) who have experienced significant failure with conventional restorative and fixed prosthodontic treatments. The objective of the protocol is to establish a functional and patient-friendly prosthetic structure for individuals with unilateral/bilateral cleft lip and palate (UCLP/BCLP) while minimising the requirement for specialised follow-up care in the cleft unit. The study data were obtained from a retrospective cohort at Helsinki University Hospital. Prosthetic reconstructions were performed using CAD/CAM bar structures by the Atlantis 2in1 system or Createch removable telescope structures, supported by four to eight maxillary dental implants. Out of the nine patients, seven experienced no complications. One prosthesis fracture occurred after 16 months due to a design error in the original framework, and one patient experienced failure of osseointegration in a dental fixture (specifically, one fixture out of the eight maxillary implants in this patient). In total, 56 implants were successfully placed. The maxillary dentition of elderly patients with cleft lip and palate often poses challenges due to periodontal and reconstructive issues. An implant-supported CAD/CAM bar with a removable telescope suprastructure offers an easily maintained and functional solution for dental rehabilitation.