Analysis and prediction of compressive and split-tensile strength of secondary steel fiber reinforced concrete based on RBF fuzzy neural network model

Abstract

Accurate analysis of the strength of steel-fiber-reinforced concrete (SFRC) is important for ensuring construction quality and safety. Cube compression and splitting tensile tests of steel fiber with different varieties, lengths, and dosages were performed, and the effects of different varieties, lengths, and dosages on the compressive and splitting properties of secondary concrete were obtained. It was determined that the compression and splitting strengths of concrete could be effectively improved by the addition of end-hooked and milled steel fibers. The compressive and splitting strengths of concrete can be enhanced by increasing the fiber length and content. However, concrete also exhibits obvious uncertainty owing to the comprehensive influence of steel fiber variety, fiber length, and fiber content. In order to solve this engineering uncertainty, the traditional RBF neural network is improved by using central value and weight learning strategy especially. On this basis, the RBF fuzzy neural network prediction model of the strength of secondary steel fiber-reinforced concrete was innovatively established with the type, length and content of steel fiber as input information and the compressive strength and splitting tensile strength as output information. In order to further verify the engineering reliability of the prediction model, the compressive strength and splitting tensile strength of steel fiber reinforced concrete with rock anchor beams are predicted by the prediction model. The results show that the convergence rate of the prediction model is increased by 15%, and the error between the predicted value and the measured value is less than 10%, which is more efficient and accurate than the traditional one. Additionally, the improved model algorithm is efficient and reasonable, providing technical support for the safe construction of large-volume steel fiber concrete projects, such as rock anchor beams. The fuzzy random method can also be applied to similar engineering fields.