Analysis of data exchange quality in LORA SX1262 Multipoint Telemetric Communication Network

Abstract

This study aims to determine the results of the analysis of Quality of Service (QoS) parameter testing using LoRa SX1262 telemetry with a certain distance on Smart PDAM and determine the effectiveness of using LoRa SX1262 telemetry on data exchange on multipoint communication networks. The data collection technique uses observation and documentation techniques to obtain valid test results data. This study uses an quantitative descriptive analytical approach with a standard assessment of the TIPHON QoS parameters on the throughput, delay, packet loss, and RSSI (Received Signal Strength Indicator) values. Based on the results of the analysis of this study, it was found that the data can be received well when the RSSI value is above -90 dBm, the average throughput and packet loss values resulting from data transmission on a digital water meter system is inversely proportional to the amount of bandwidth, the average delay of sending LoRa SX1262 telemetry data using a 115200 baud rate of 513 milliseconds. The conclusion of this study is that multipont communication on digital meter data transmission is effectively used at a maximum distance of 300 meters with a bandwidth of 500 kHz.