Analysis of Liquefaction in Tailings Deposits by Fem Modeling of Undrained Cyclic Triaxial

Abstract

In this article, a numerical calibration procedure for undrained cyclic triaxial tests is presented to evaluate the liquefaction potential in sand and silt samples from mining tailings in northern Chile. The numerical modeling of an axisymmetric specimen involved two stages: isotropic consolidation using the Hardening Soil Small (HSS) model and a cycling phase employing the UBC3D-PLM model to simulate the onset of liquefaction using the criterion that the excess pore pressure ratio Ru should exceed 0.8. The results demonstrate that the UBC3D-PLM modeling calibrated with experimental data from cyclic triaxial tests effectively represents the excess pore pressure in both sandy and silty soils from mining tailings. The accuracy of the modeling decreases when a single set of parameters is applied to the same soil at different cyclic stress ratios (CSR), highlighting the need for specific calibrations for each loading.