Analysis of the Creeping Phenomenon of Linear Feed System Based on the Rigid‐Flexible Coupling Model

Abstract

A mathematical model of the creeping phenomenon based on the mechanical model of the linear feed system was established. The dynamic characteristic parameters of each fixed joint were obtained by Yoshimura’s integral. Using the method, only the dynamic characteristic parameters of the joint surface per unit area with simple structure need to be studied, and then, the dynamic characteristic parameters of the whole joint surface can be obtained by integration. Based on the principle of the half-power bandwidth method and the frequency response function identification, the dynamic parameters of each moving joint were solved by the method of experimental modal analysis. Through the parameters of the fixed and moving joints, a rigid body model of the feed system and a flexible body model including the power transmission parts (ball screw pair) and the motion guide parts (guide slide pair and rolling bearing) were, respectively, established. And then, a rigid-flexible coupling dynamic model of the feed system was obtained through the constraint relationships between joints. The influence of both the external load and the feed rate on the fluctuation of motion speed of the system was analyzed from this model. The difference between the experimental results and the simulation results on a feed system platform is not greater than 10%, which verifies the creeping phenomenon. This conclusion can provide a basis for the optimization of the dynamic performance of the ball screw linear-feeding workbench.