Analyzing Rice Grain Collision Behavior and Monitoring Mathematical Model Development for Grain Loss Sensors

Abstract

Grain loss in the harvesting process of combine harvesters not only causes economic losses to farmers but also affects the soil environment because of the lost grain covering the soil, influencing crop growth in the next season. Grain sieve loss-monitoring sensors represent an important accessory in combine harvesters, as they can not only provide current grain loss levels for the operator to adopt a rational action in time but also serve as an important performance signal for the control system. To reflect the rice grain sieve loss level of combine harvesters in real time, an indirect grain sieve loss-monitoring system is proposed in this paper. First, the grain collision rise time was obtained by the finite element method (FEM), and the parameters of the grain loss sensor signal processing circuit were determined accordingly to upgrade the monitoring accuracy. Then, grain loss distribution behind the cleaning shoe was analyzed in detail under different working parameters. Grain loss distribution functions at the end of the sieve and a monitoring mathematical model with relevant variables were established based on the laboratory experiment results. Finally, calibration experiments were carried out to verify the measurement accuracy of the sensor on a cleaning test bench, with an obtained relative monitoring error ≤6.41% under different working conditions.

Study on the Technologies of Loss Reduction in Wheat Mechanization Harvesting: A Review

“…Grain harvest loss is an important index to measure the performance of a combine harvester. Due to low manufacturing levels and a lack of advanced technology guidance for domestic combine harvesters, the total loss rate of grain in field harvesting operations may be as high as 10% [76,77]. Grain loss during combine harvester operation not only causes economic losses to farmers but also damages the soil environment and affects the growth of the next crop [78].…”