Bi-Level damped double-tuned harmonic passive filters design: Multi-criteria decision-making analysis

Zobaa, Ahmed M.; Aleem, Shady H. E. Abdel; Youssef, Hala

doi:10.1016/j.asej.2022.102082

Cited by 6 publications

(4 citation statements)

References 34 publications

Supporting

Mentioning

Contrasting

Order By: Relevance

“…These filters can suppress a wide range of harmonic frequencies, making them suitable for HC enhancement. Passive power filter design and optimization for harmonic mitigation within the context of HC enhancement is an ongoing research field in line with the literature [7,8].…”

Section: Introductionmentioning

confidence: 73%

“…Passive power filters are cheaper and more suitable for high-voltage and high-power applications than active power filters [28]. Damped passive power filters are used to avoid harmonic resonance problems while improving the system power quality, as in [7,8].…”

Section: Plos Onementioning

confidence: 99%

“…There are six schemes for this filter in the literature, four of them are single-resistor schemes, and two of them are double-resistor. Only the single-resistor schemes were designed, analyzed, and compared in the literature; however, one scheme (scheme B) was proven to be superior compared to the others [8]. This filter provides harmonic mitigation of the system, which improves power quality indices such as: voltage total harmonic distortion (THD V ), current total demand distortion (TDD I ), and individual harmonic voltage and current distortions (IHD V and IHD I ) and corrects the true power factor (PF) of a combination of linear and nonlinear loads.…”

Section: Plos Onementioning

confidence: 99%

“…paper, DR-DDTFs are utilized as well as Scheme B as the best SR-DDTF according to [8]. The direct design equations of the undamped double-tuned filter (DTF) design equations were introduced in [29].…”

Section: Plos Onementioning

confidence: 99%

See 3 more Smart Citations

Harmonics management and hosting capacity enhancement: Optimal double-resistor damped double-tuned power filter with artificial hummingbird optimization

Alhaider,

Abdel Aleem,

Ali

et al. 2024

PLoS ONE

View full text Add to dashboard Cite

This paper introduces a novel and improved double-resistor damped double-tuned passive power filter (DR-DDTF), designed using multi-objective optimization algorithms to mitigate harmonics and increase the hosting capacity of distribution systems with distributed energy resources. Although four different topologies of single-resistor damped double-tuned filters (DDTFs) have been studied before in the literature, the effectiveness of two different DR-DDTF configurations has not been examined. This work redresses this gap by demonstrating that via comprehensive simulations on two power systems, DR-DDTF provides better harmonic suppression and resonance mitigation than single-resistor alternatives. When it comes to optimizing the DR-DDTF for maximum hosting capacity and minimum system active power losses, the multi-objective artificial hummingbird outperformed six other algorithms in the benchmark. To allow for higher penetration of distributed generation without requiring grid upgrades, this newly developed harmonic mitigation filter provides a good alternative.

show abstract

Section: Introductionmentioning

confidence: 73%

Section: Plos Onementioning

confidence: 99%

Section: Plos Onementioning

confidence: 99%

Section: Plos Onementioning

confidence: 99%

See 2 more Smart Citations

Harmonics management and hosting capacity enhancement: Optimal double-resistor damped double-tuned power filter with artificial hummingbird optimization

Alhaider,

Abdel Aleem,

Ali

et al. 2024

PLoS ONE

View full text Add to dashboard Cite

show abstract

Single-tuned passive filter (STPF) for mitigating harmonics in a 3-phase power system

Ishaya,

Adegboye,

Agyekum

et al. 2023

Sci Rep

View full text Add to dashboard Cite

Numerous integrals of the fundamental frequency are known as harmonics and can be found in power systems or electrical circuitry systems. Non-linear loads occasionally drain current or contains a varying impedance with each period of the AC voltage are often responsible for power system harmonics. This can result in system overheating, system losses, and equipment or system damage. In order to achieve the IEEE 519 power quality standard, filters are routinely employed to lower harmonic levels. In this work, we designed a single tuned passive filter (STPF) to minimize harmonics of sequence 5th, 7th, 11th, 13th, 17th, and 19th in a three (3) phase power system. The measurements were taken at the point of common coupling. To test the filter performance, the system and STPF were designed in MATLAB/Simulink, and the simulated results produced without and with STPF were compared. The $${THD}_{I}$$ THD I was reduced from 14.93% down to 4.87% when STPF was connected which is within the IEEE 519-2022 standard; proving that the STPF was effective in decreasing the harmonics to the desired level.

show abstract

Complexities of Power Quality and Harmonic-Induced Overheating in Modern Power Grids Studies: Challenges and Solutions

Ali,

Ćalasan,

Jurado

et al. 2024

IEEE Access

View full text Add to dashboard Cite

Bi-Level damped double-tuned harmonic passive filters design: Multi-criteria decision-making analysis

Cited by 6 publications

References 34 publications

Harmonics management and hosting capacity enhancement: Optimal double-resistor damped double-tuned power filter with artificial hummingbird optimization

Harmonics management and hosting capacity enhancement: Optimal double-resistor damped double-tuned power filter with artificial hummingbird optimization

Single-tuned passive filter (STPF) for mitigating harmonics in a 3-phase power system

Complexities of Power Quality and Harmonic-Induced Overheating in Modern Power Grids Studies: Challenges and Solutions

Contact Info

Product

Resources

About