Cast Microstructure and Crystallographic Features of Al3Sc Dendrites in High Sc-Contained Al-Sc Alloys

Abstract

Al-Sc alloys containing high Sc content are employed as sputtering targets for the fabrication of high-performance piezoelectric films during magnetic sputtering. Due to the high proportion of the Al3Sc phase, their workability is quite limited, and they are often used in the as-cast state. In this study, the crystallography of Al3Sc dendrites in as-casted Al-10at.%Sc and Al-20at.%Sc samples is examined using electron backscatter diffraction (EBSD). With increasing Sc content, the fraction of Al3Sc also increases. The Al3Sc dendrites exhibit a cubic relationship with the Al matrix in both alloys. However, in Al-10%Sc alloys, the facets of the Al3Sc dendrites are parallel to {001} planes, while twinning is observed in Al-20at.%. The twinning plane is parallel to the {111} plane, and the dendrite growth direction aligns with the <110> directions. The different morphologies of the dendrite structures in these two alloys are discussed in relation to thermodynamic and kinetic considerations based on the phase diagram and nucleation rate.