CEST MR‐Fingerprinting: Practical considerations and insights for acquisition schedule design and improved reconstruction

Abstract

Purpose: To understand the influence of various acquisition parameters on the ability of CEST MR-Fingerprinting (MRF) to discriminate different chemical exchange parameters and to provide tools for optimal acquisition schedule design and parameter map reconstruction. Methods: Numerical simulations were conducted using a parallel computing implementation of the Bloch-McConnell equations, examining the effect of TR, TE, flip-angle, water T 1 and T 2 , saturation-pulse duration, power, and frequency on the discrimination ability of CEST-MRF. A modified Euclidean distance matching metric was evaluated and compared to traditional dot product matching. L-Arginine phantoms of various concentrations and pH were scanned at 4.7T and the results compared to numerical findings. Results: Simulations for dot product matching demonstrated that the optimal flipangle and saturation times are 30 • and 1100 ms, respectively. The optimal maximal saturation power was 3.4 μT for concentrated solutes with a slow exchange rate, and 5.2 μT for dilute solutes with medium-to-fast exchange rates. Using the Euclidean distance matching metric, much lower maximum saturation powers were required (1.6 and 2.4 μT, respectively), with a slightly longer saturation time (1500 ms) and 90 • flip-angle. For both matching metrics, the discrimination ability increased with the repetition time. The experimental results were in agreement with simulations, demonstrating that more than a 50% reduction in scan-time can be achieved by Euclidean distance-based matching. Conclusions: Optimization of the CEST-MRF acquisition schedule is critical for obtaining the best exchange parameter accuracy. The use of Euclidean distance-based matching of signal trajectories simultaneously improved the discrimination ability and reduced the scan time and maximal saturation power required. |

Unsupervised learning for magnetization transfer contrast MR fingerprinting: Application to CEST and nuclear Overhauser enhancement imaging

“…However, the reduction of the number of dynamic scans is beneficial. 50,51 The optimization of the acquisition schedule to improve accuracy and scan efficiency may be an important avenue for future studies to explore.…”

“…Importantly, the estimation of the MTC parameters satisfied all of the 40 RF saturation conditions that would guarantee a unique solution of the ill‐posed inverse Bloch equation problem. However, the reduction of the number of dynamic scans is beneficial 50,51 . The optimization of the acquisition schedule to improve accuracy and scan efficiency may be an important avenue for future studies to explore.…”

“…Training loss as a function of the epoch number obtained from the unsupervised learning model. Quantitative MTC and water parameter maps obtained at different epochs(50, 100, 150, 300, 600, and 1000) are shown inside the loss graph. The display windows are K mw (5 to 50 Hz), M m 0 (0 to 18 M), T m 2 (0 to 100 μs), and T w 1 (0.5 to 2.5 seconds).…”

AI boosted molecular MRI for apoptosis detection in oncolytic virotherapy

“…1a-b). The simulations were carried out using a numerical solution of the Bloch-McConnell equations, implemented in MATLAB R2018a (The MathWorks, Natick, MA) and C++ 41,56 . Generating all dictionaries used in this work took a total of 62.5 hours, using a computer cluster employing 56 CPUs.…”

“…CEST MR-fingerprinting with conventional dictionary matching (Extended Data Fig. 2g-l) was performed by calculating the dot-product after 2-norm normalization of each amide encoded image pixel trajectory with all relevant dictionary entries (Extended Data Table 1) 41,56 . Mouse tumor regions of interest (ROIs) (Fig.…”