Compact Wilkinson Power Divider With Common Inductor on the IPD Process

Abstract

This paper presents a Wilkinson power divider using a common inductor. The lumped topology uses the inherently inductive loss of the inductor as a part of the design, so the conventional resistor for high isolation can be omitted. Therefore, low-loss and high-isolation performances of the compact circuit were achieved. The proposed 2.5-GHz divider was implemented on a silicon-based integrated passive device process. Measurement of the prototype chip had a reflection coefficient below 18 dB at all ports, an insertion loss of 0.5 dB and isolation above 28 dB. The chip size is merely 0.011o  0.019o. INDEX TERMSWilkinson power divider, lumped transmission line, resistorless, common inductor, integrated passive devices.