Comparative Analysis of Bending Strength Properties between Glued and Un-Glued Finger Joints in Beech and Fir Wood Species

Abstract

The aim of this study was to investigate the mechanical behavior of beech and fir finger joints under laboratory conditions. The samples were manufactured using a 9 mm finger joint with glued surfaces, in accordance with the EN 14 080 standard. Polyurethane adhesive of class D3, commonly used for the production of exterior wooden structures in Bosnia and Herzegovina, was applied to the samples. The specimens were subjected to destructive four-point bending tests according to the BAS EN 408 standard, and the achieved bending strength was statistically evaluated and compared to the results of unglued samples.