Composite Wood–Concrete Structural Floor System with Horizontal Connectors

Abstract

The concept of horizontal shear connection utilization on wood-concrete beams intends to be an alternative connection detail for composite wood-concrete decks. The volume of sawn-wood is over three times more expensive than concrete, in Brazil. In order to be competitive in the Brazilian market we need a composite deck with the least amount of wood and a simple and inexpensive connection detail. This research project uses medium to high density tropical hardwoods managed from the Brazilian Amazon region and construction steel rods. The beams studied are composed of a bottom layer of staggered wood boards and a top layer of concrete. The wood members are laterally nailed together to form a wide beam, and horizontal rebar connectors are installed before the concrete layer is applied on top. Two sets of wood-concrete layered beams with horizontal rebar connectors (6 and 8) were tested in third-point loading flexural bending. The initial results reveal medium composite efficiency for the beams tested. An improvement on the previously conceived connection detail (set with six connectors) for the composite wood-concrete structural floor system was achieved by the set with eight connectors. The new layout of the horizontal rebar connectors added higher composite efficiency for the beams tested. Further analysis with advanced rigorous numerical Finite Element Modeling is suggested to optimize the connection parameters. Composite wood-concrete decks can attend a large demand for pedestrian bridges, as well as residential and commercial slabs in the Brazilian Amazon.

Alternativa sustentable para la construcción de losas de entrepiso utilizando madera y concreto

“…Así mismo, en la revisión que se hizo de los sistemas compuestos de madera y concreto (SáRibeiro et al, 2005;Bathon et al, 2006;Tajnik, et al, 2007;Yeoh, et al, 2008;Yeoh, 2010;Saleh, 2013y Boccadoro y Frangi, 2014, se observó que, en la mayoría de ellos, utilizan madera micro laminada o paneles para las trabes, sólo uno utiliza madera en su estado natural. Algunos utilizan una capa delgada de madera de chapa laminada en toda la losa y la mayoría de ellos son prefabricados.…”