The piled embankment represents one of the solutions for the realization of a soil body on a compressible subsoil where extended settlement or insufficient stability threatens the serviceability of related structures. Widely adopted analytical design procedures were analyzed: Marston’s formula and Hewlett and Randolph method contained in the British standard BS 8006-1, the German regulation EBGEO and the Dutch regulation CUR 226. Using these recommendations, the theoretical values of the individual parts of the load acting in the embankment and, subsequently, the values of the axial strain or tensile forces in the reinforcement were determined and compared with experimental data obtained from the tests in the large-scale physical model. For the presented case, without subsoil support, CUR 226 with the inverse load, which is recommended in the case of subsoil with low bearing capacity, shows better coincidence with the measured data. Overall, EBGEO and CUR 226 can be considered to be close to the real behavior of the piled embankment. Because of the frequent utilization of geosynthetic reinforcement and possible changes of subsoil parameters during the service life of the piled embankment, a rheological process of its elements should be investigated during the design process.