Design and Implementation of Microstrip Circular Patch Antenna for 5G Applications

Colaco, John; Lohani, Rajesh B.

doi:10.1109/icecce49384.2020.9179263

Cited by 32 publications

(7 citation statements)

References 8 publications

Supporting

Mentioning

Contrasting

Order By: Relevance

“…For which different values of loss tangent and thickness are available. RT Duroid 5880 -0.5 mm [40] RT Duroid 5880 0.0009 0.127 mm [41] RT/Duroid 5880 -0.254 mm [42] RT Duroid 5880 0.0009 0.127 mm [43] Rogers RO4350 -- [44] Rogers RT 5880 0.0009 0.17 mm [45] Rogers RT 5880 0.2 - [46] RT Duroid 5880 0.0009 - [47] FR-4 substrate 0.0010 - [48] Rogers RT 5880 -1.57 mm [59] Rogers RT 5880 -0.…”

Section: Literature Reviewmentioning

confidence: 99%

Microstrip patch antennas for various applications: a review

Rana

Rana²,

Rahman³

2023

IJEECS

View full text Add to dashboard Cite

<span lang="EN-US">This paper aims to review microstrip antennas for various applications. The design of microstrip patch antennas is a new research field developed for use in 5th generation communication applications. An antenna is a collection of multiple devices connected together that function as a single antenna to send or receive radio waves. Antennas can be of different shapes and sizes. The microstrip patch is an antenna pattern that is light in weight, low profile, and focuses on producing results. In the future, microstrip patch antennas may be used for some 6G communication systems applications. In addition, 6G communication applications can be created on other devices, including biomedical, autonomous vehicles, vehicle-to-vehicle (V2V) communication, internet of things (IoT), machine learning, Artificial Neural Network Algorithms, radar, and wireless communication. In the past, the multiple input, multiple output (MIMO) pattern was a standard geometry used in 4G wireless applications. This paper discusses the geometric structures of antennas, various analysis methods for antenna characteristics, antenna dimensions, and many different types of antennas. Also, it will discuss the previous papers' substrate materials, loss tangent, thickness, return loss, bandwidth, voltage-standing-wave-ratio (VSWR), gain, and directivity.</span>

show abstract

Section: Literature Reviewmentioning

confidence: 99%

Microstrip patch antennas for various applications: a review

Rana

Rana²,

Rahman³

2023

IJEECS

View full text Add to dashboard Cite

show abstract

“…To make it suitable for 5G usage, J. Colaco et al study the design of a circular MPA with a resonance frequency of 28.4 GHz and a microstrip feed line. [15]. S. R. Govindarajulu et al introduce integrating nearby parts, a Wilkinson power divider is used due to the huge available connection size.…”

Section: Literature Surveymentioning

confidence: 99%

Design of Circular Microstrip Patch Antenna-Array for 5G Wi-Fi Network

Tiwari¹,

Sharma²,

Dubey³

2023

IJETAE

View full text Add to dashboard Cite

An antenna that works at high frequencies, specifically in the microwave region, is called an MPA, which stands for "Microstrip Patch Antenna." MPA is appropriate for electronic and wireless communication devices operating on 4G and 5G. This research presents the design and fabrication of a 1X2 and 1X4 circular form MPA-Array for a 5G wireless communication system. It is possible to get three distinct resonant frequencies of 4.5GHz, 5.4GHz, and 6.4GHz, with a value of gain 7.22dBi and a bandwidth of 2012MHz. The concept uses a cutting-edge layout for a patch antenna with a circular form and a partial ground. The Printed Circuit Board (PCB) constructed of copper with two sides is used to create the hardware design. An FR-4 epoxy substrate is used to fabricate the MPA-A, which is then put through an experimental test where its findings are compared to those generated by a simulation

show abstract

“…The authors specified the results obtained from both simulation and measurements together with the application of their design. Colaco et al [23] called attention to the need for efficient antennas in the rapidly growing regions of the world and listed the applications of their design. The parameters of their design in company with the software used for their simulations and results obtained through these simulations were identified.…”

Section: -Literature Reviewmentioning

confidence: 99%

Microstrip Patch Antenna with C Slot for 5G Communication at 30 GHz

Kishore¹,

Rajak²

2022

Emerg Sci J

View full text Add to dashboard Cite

A novel design of a 30 GHz microstrip line-fed antenna for 5G communication has been presented in this paper. 5G is the latest industry standard in mobile communication, which is designed to deliver higher data speeds, lower latency, greater network capacity, and higher reliability. It uses major parts of the mmWave spectrum (28 GHz to 40 GHz), allowing for a wide range of applications like mobiles, vehicles, medical devices, and other IoT networks. This mmWave network requires efficient antennas for its effective communication. Patch antennas use the function of oscillating their physical structure to the wavelength of the transmitting wave. Thus, higher efficiency can be achieved in the mmWave spectrum due to its proximity to the actual dimensions of the patch antenna, which also allows us to design antennas at small sizes and high reliability. The design in this report has a patch antenna with a centre frequency of 30 GHz. The antenna was optimized for this frequency based on the best reflection coefficient and gain while keeping the restraints of staying within the FR-2 band of 28 GHz to 33 GHz. The proposed antenna has been implemented using Rogers RT5880 substrate for high gain and performance across a wide range of frequencies. The feed is also accompanied by a quarter-wave feed cut for performance increase and impedance matching. The design has a gain of 8.45, with a reflection coefficient of -8 dB at a resonant frequency of 30 GHz. It shows great directivity of 5o and VSWR of 2.3 over a bandwidth of 3.5 GHz. It also employs a 0.4 mm C slot, which induces a dipole effect, thereby increasing the directivity and gain of the antenna. Hence, it is recommended for use in applications related to 5G mobile communication. Doi: 10.28991ESJ-2022-06-06-06 Full Text: PDF

show abstract

Design and Implementation of Microstrip Circular Patch Antenna for 5G Applications

Cited by 32 publications

References 8 publications

Microstrip patch antennas for various applications: a review

Microstrip patch antennas for various applications: a review

Design of Circular Microstrip Patch Antenna-Array for 5G Wi-Fi Network

Microstrip Patch Antenna with C Slot for 5G Communication at 30 GHz

Contact Info

Product

Resources

About