Designing Power Transformer Using Particle Swarm Optimization with Respect to Transformer Noise, Weight, and Losses

Abstract

The increased use of electrical energy will encourage the installation of more power transformers in residential areas as well as in industrial areas. Each power transformer, in its operation, will generate noise that can interfere with comfort and, at some level, cause health problems. The design of the power transformer currently focuses on optimizing its economic side, so noise has not been considered at this design stage. This research is about optimizing the low noise transformer design. The main goal is to obtain a low noise power transformer with low production costs. The method used in this optimization is particle swarm optimization with a multi-objective function. The objective function consists of the minimization of load noise, core weight, and winding weight. In this study, 11 optimized variables were used. Some variables that are optimized must be in the form of integers. Therefore, the optimization process needs a mechanism for mapping variables. The results showed that a low noise power transformer could be designed at optimal cost. Design validation was performed analytically and numerically with COMSOL software. The optimization results showed a decrease in load noise, core, and winding weight by 0.86 dB, 2.12%, and 47.46%, respectively. The results of this optimization are better than the designs used regularly in the industry.

Design of IOT-Based Framework for Evaluation of Energy Efficiency in Power Transformers

“…where K is the constant coefficient (for a single-phase transformer, K equals 1; for a threephase transformer, K equals 1.5) [54]. The nominal total Stray loss P TSL-N is calculated according to Equation (6):…”