Development of a Small-Sized Line Heat Source Apparatus for the Thermal Conductivity Measurement of Extraterrestrial Soils

Abstract

The thermal conductivity of planetary soils, or regolith, is essential for understanding the present global thermal state of bodies. The thermal conductivity of lunar soils is important with respect to lunar crustal heat flow. Although in situ measurements were performed by the Apollo 15 and 17 missions, laboratory measurements of the returned lunar samples have not reproduced the estimated subsurface values. Since the amount of extraterrestrial soil samples is limited, a small apparatus is needed to measure their thermal conductivity. In this study, we developed an apparatus enabling the measurement of the thermal conductivity of a small amount of soil (< 10 g) via the line heat source method as a function of compressional pressure under vacuum conditions. The thermal conductivity of glass beads and lunar regolith simulant derived by the new apparatus is higher than that obtained from the larger line heat source, and then, reliable apparatus. To evaluate the experimental results, we performed numerical simulation of the temperature evolution during the line heat source measurement, and found that the thermal conductivity derived from the simulation data is higher than the input thermal conductivity. This is consistent with the experimental results and is caused by the heat loss through a line heat source with a limited length. The difference depends on the contact conductance between the sample and the line heat source, and the calibration factors for each sample are determined. Keywords Granular materials • Heat flow experiments • Lunar regolith • Thermal conductivityThis article is part of the Special Issue on Thermophysics of Advanced Spacecraft Materials and Extraterrestrial Samples.