Development of IoT-Based Particulate Matter Monitoring System for Construction Sites

Abstract

Particulate matters (PMs) generated on construction sites can pose serious health risks to field workers and residents living near construction sites. PMs are generated in a wide range of locations; therefore, they must be managed in real time at various locations within construction sites for practical management of the PMs. However, no such systems exist currently. Therefore, this study aims to develop a system that can manage PMs in real time at multiple locations in a construction site using the Internet of Things technology. Accordingly, measuring instrument, network, and program services were developed as system components, while considering the characteristics of construction sites, and the construction site PM monitoring system was developed by integrating these components. Finally, performance certification and field application tests were performed to verify the developed system. The construction site PM monitoring system (CPMS) achieved grade 1 for reproducibility, relative precision, and data acquisition rate, and grade 2 for accuracy and coefficient of determination. Thus, it received a performance certification of grade 2, in total. In particular, regarding accuracy, which is a shortcoming of the light-scattering method and represents the accuracy of measurements, the CPMS was found to have an accuracy of 74.2%.

Research Review Inquisitive on Indoor Air Quality Monitoring System Facilitate with Internet of Things

“…Figure 3 illustrates the outcome of CO absorption for individual human. The growing field of sustainable in transformation over industries, quality of air has gradually broken down by the reason of change in climate and usage of heavy vehicle in urban region [28]. In recent days, particle matter is responsible for high severe affects the human body.…”

Analysis of the Economic Efficiency of Outsourcing

“…This phase is necessary to determine the previously adopted strategic decisions, which is particularly important and complicated because it will be made a final decision on outsourcing only with its positive result [4][5][6][7][8].…”

Design and Evaluation of a Dryer System for IoT Hyperlocal Particulate Matter Monitoring Device

“…IoT sensors has increased in recent years. The need of IoT on nanoparticles is highlighted by the fact that real-time data can ease the process of decision-making, and IoT should address this [11]. The IoT devices are based on optical particle counters that base the measurement on the assumption that the number of particles is proportional to the light scattering.…”