Different microstructure BaO–B2O3–SiO2 glass/ceramic composites depending on high-temperature wetting affinity

Preparation of LTCC materials with adjustable permittivity based on BaO–B2O3–SiO2/BaTiO3 system

“…3. It was observed that the porous increased gradually with the increase of the BaTiO 3 addition [11]. Their bulk densities were 4.21, 4.31, 4.25, 4.23, 4.12 and 4.04, respectively.…”

“…The dissolution of BaO and TiO 2 into 21.43BaO-67.06B 2 O 3 -11.51SiO 2 glass led to a noticeable BaTi(BO 3 ) 2 and Ba 2 TiSi 2 O 8 phases formation occurs while the temperature increases [10]. It was found that rutile additive could not be wet the 32BaO-15B 2 O 3 -53SiO 2 glass matrix under high-temperature conditions but could accelerate the phase separation and crystallization of the glass phase during the sintering process by Cui et al [11,12].…”

Surface adhesion between ceramic injection molding feedstocks and processing tools

“…Contact angle measurement is provided as it has proved itself a method widely employed as a characterization tool in ceramic processing (e.g. [7][8][9]). …”

Low temperature sintering and characteristics of K2O–B2O3–SiO2–Al2O3 glass/ceramic composites for LTCC applications

“…Low temperature co-fired ceramics (LTCC) is a new type of technology development as the requirement of minimization, multilayer, highly integrate and highly speed for electronic components [1][2][3]. LTCC substrate materials becomes the indispensible new material in computer, T/R module and optical communication field [4].…”