Digital Manufacturing of Pathologically-Complex 3D Printed Antennas

Abstract

In the last decade, the proliferation of new 3D printing technologies has enabled the fabrication of complex geometries in manifold materials for novel applications. One discipline that has been explored extensively in the context of additive manufacturing is electromagnetic devices such as antennas. Difficultto-fabricate geometries are now possible and can deliver new antenna functionality and extend performance (e.g., lower frequency resonance in small volumes, wider bandwidth, narrow-beam directionality, and so on). Coupled with accurate 3D electromagnetic simulations, a new paradigm is emerging for antenna design and manufacture. Starting from a seed geometry, the state space can now be explored to identify new combinations and permutations of electromagnetically-beneficial shapes through multiple simulation iterations. Subsequently, the identified structures can be further validated and improved through rapid manufacturing using 3D printing for hardware evaluation in an anechoic chamber. However, to fully benefit from this emerging paradigm, an up-to-date survey of the most recent metal processes is required. This survey would determine which processes are well suited for building the next generation of antennas. For this purpose, a variety of metal 3D printing was employed to fabricate benchmark antennas with pathological geometries, including thin walls, overhanging features, and large aspect ratios. This survey can inform designers about potential structures to serve in novel antennas. A total of five processes have been preliminarily explored including selective laser melting, binder jetting, and plated vat photopolymerization, all of which delivered different advantages and disadvantages in terms of mechanical and electromagnetic performance. INDEX TERMS 3D printing, 3D printed antennas, 3D Hilbert curve, additive manufacturing, antenna radiation pattern, binder jetting, dipole antennas, fractal antenna, multifrequency antennas, powder-bed fusion, ultra high frequency, UHF, vat photopolymerization.

Integration of Additive Manufacturing, Parametric Design, and Optimization of Parts Obtained by Fused Deposition Modeling (FDM). A Methodological Approach

“…Thus, today additive manufacturing represents a real alternative that is applied in very different productive contexts [ 57 , 58 ], what has been driving a great development in terms of increasingly efficient equipment and processes, as well as new materials [ 59 , 60 , 61 ]. Thus, additive manufacturing radically changes the productive paradigm, offering new scenarios and possibilities, both in relation to the agents involved and their roles and in the way in which products are thought and conceived [ 62 , 63 , 64 , 65 , 66 ].…”

Design Optimization of Permanent Magnet Clutch with Ārtap Framework

“…However, manufacturing of geometrically complex objects has become possible employing modern techniques (e.g. additive manufacturing) [17][18][19][20][21]. Therefore, few studies have attempted to obtain more intricate designs.…”

Analysis of General and Specific Standardization Developments in Additive Manufacturing From a Materials and Technological Approach

“…Nowadays additive manufacturing is a consolidated reality. A significant number of very different technological alternatives are included under this category [1]; the materials used [2]- [4], the applications [5], [6], benefits and challenges are constantly increasing [7]- [9] and the corresponding processes are being deeply studied, not only from technological approaches, but also in relation to their role in future productive scenarios [10], [11] and considering other aspects such as economic [12], [13], sustainability [14] or even security issues [15]. And there are other challenges regarding the integration of additive manufacturing into a complete digital thread based on standards [16], [17].…”