Displacement driven simulation and material calibration based on digital image correlation Part I - Theory

Abstract

Standard material characterization methods for subsequent finite element analysis rely on the simulation utilizing ideally discretized specimen that represent its geometrical characteristics as in the real experiment. Since many material models hold a set of parameters which is dependent on the discretization, e.g. the mesh size, especially when failure prediction for crash analysis is relevant, various mesh sizes are utilized during this calibration process. Optical measurement systems accompanying the experimental tests have become a standardized procedure, at least for a 2-dimensional (or specimen top-surface) measurements. Investigated calibration methods relying on the results of these optical measurements either include the derived strain field into the characterization process (full-field calibration), determine the crack path and iteratively derive plasticity curves (stepwise-modelling approach) or establish virtual fields based on the principal of virtual work allowing to solve for the scalar unknowns of the underlying chosen constitutive equation (virtual fields method). In the presented work, we directly use displacements measured using a GOM/ARAMIS system, mapped as boundary conditions for the nodal displacements of differently discretized specimen to establish a material characterization scheme being as close to the experiment as possible.