Durability Analysis of Cold Spray Repairs: Phase I—Effect of Surface Grit Blasting

Abstract

This paper presents the results of an extensive investigation into the durability of cold spray repairs to corrosion damage in AA7075-T7351 aluminium alloy specimens where, prior to powder deposition, the surface preparation involved grit blasting. In this context, it is shown that the growth of small naturally occurring cracks in cold spray repairs to simulated corrosion damage can be accurately computed using the Hartman–Schijve crack growth equation in a fashion that is consistent with the requirements delineated in USAF Structures Bulletin EZ-SB-19-01, MIL-STD-1530D, and the US Joint Services Structural Guidelines JSSG2006. The relatively large variation in the da/dN versus ΔK curves associated with low values of da/dN highlights the fact that, before any durability assessment of a cold spray repair to an operational airframe is attempted, it is first necessary to perform a sufficient number of tests so that the worst-case small crack growth curve needed to perform the mandated airworthiness certification analysis can be determined.