Dyeing Silk Fabric with Natural Dye from Longan Leaves Using Simultaneous Mordanting Method

Maha-In, Kongkiat; Mongkholrattanasit, Rattanaphol; Klaichoi, Charoon; Pimklang, Wiphawan; Buathong, Panida; Rungruangkitkrai, Nattadon

doi:10.4028/www.scientific.net/msf.857.491

Cited by 3 publications

(3 citation statements)

References 7 publications

Supporting

Mentioning

Contrasting

Order By: Relevance

“…It explains that lower value of L* has higher darker shades and higher value of L* has lighter shades for tencel fabric. The +a* value indicates red and -a* values indicates green colour, while +b* values indicates yellow and -b* values indicates blue colour [31]. Due to chemical mordants, the highest colour value (K/S = 4.72) was found with ferrous sulphate and lowest colour value (K/S = 1.57) with copper sulphate.…”

Section: Resultsmentioning

confidence: 97%

Study on Tencel Fabric Dyeing with Pomegranate Peel Natural Dyes

Rehman¹,

Naveed²,

Nadeem³

et al. 2017

Asian J. Chem.

View full text Add to dashboard Cite

Textile industries have initiated consideration of using natural dyes, for dyeing and printing of textile goods, to provide the eco-friendly environment. In this research, dyestuff extraction from the pomegranate peel was applied to dye tencel fabric by the solvent extraction process. Ferrous sulphate and copper sulphate were used as mordant agents and three different mordanting methods as pre-mordanting, simultaneous-mordanting and post-mordanting were executed. The dyeing results were accessed through colour fastness properties in accordance with the ISO standards. The color shade (K/S: 4.72), washing fastness, light and rubbing fastness in all dyed samples were excellent (4-5 grade) through pre-mordanting dyeing method. Ferrous sulphate mordant was more effective than the copper sulphate mordant while samples dyed with pomegranate peel. Perspiration fastness outcomes (4-5 grade) were similar through both mordant agents in all the methods. In general, the best results of fastness were obtained by ferrous sulphate mordant using pre-mordanting method.

show abstract

Section: Resultsmentioning

confidence: 97%

Study on Tencel Fabric Dyeing with Pomegranate Peel Natural Dyes

Rehman¹,

Naveed²,

Nadeem³

et al. 2017

Asian J. Chem.

View full text Add to dashboard Cite

show abstract

“…The darkest brown color in 70g/l lime water staining is silk, and rayon is lighter than cotton and silk. The higher the fixator concentration, the darker the color results [1,13,14,23].…”

Section: Resultsmentioning

confidence: 99%

Coloring of Mahogany (Swietenia Macrophylla King.) on Textiles with Mordant Process and Fixation Against Fastness

Nuriana,

Winarni,

Arfan

et al. 2023

IJDNE

View full text Add to dashboard Cite

This study aimed to assess the color fastness of mahogany dye on various fabrics (cotton, rayon, silk) in response to sunlight exposure, soap washing, and staining subsequent to mordanting and fixation with alum and lime solutions. The research followed a systematic approach comprising material sorting, drying, pulverization, and powder creation and sifting. Sawdust from mahogany was subjected to Soxhlet extraction with ethanol as the medium at a temperature of 78.4℃ for a duration of 4 hours. This process yielded a filtrate, which was subsequently concentrated via distillation. Prior to the dyeing process, each fabric was mordanted using a solution of alum and lime. The dyeing process was repeated five times, after which the fabric was air-dried. The fixation process involved the immersion of cotton, rayon, and silk fabrics in various concentrations of alum and lime (40g/l, 50g/l, 60g/l, and 70g/l), followed by aeration. The UV Vis spectrometry absorbance test revealed an absorbance of 0.545A for the distilled mahogany dyes, with a yield of 7.653%. Results indicated a noteworthy sunlight fastness rating of 4.8, achieved with a lime fixative solution at concentrations of 40g/l for cotton and 70g/l for silk. Soap washing resistance was found to be optimal (4.8) on silk fabric treated with lime solution at concentrations of 50g/l and 60g/l. Stain resistance was observed to be highest on rayon fabric (4.7) across all concentrations of lime solution (40g/l, 50g/l, 60g/l, and 70g/l). Mahogany dyeing with an alum solution fixative tended to yield a brown color on cotton and rayon, while silk fabric displayed an orange hue. On silk fabrics, the application of a lime fixative solution resulted in a dark brown color at a lime concentration of 70g/l. This study provides insights into the color fastness of mahogany dye on different fabrics and the influence of various mordanting and fixation solutions, contributing to the broader understanding of natural dye application in textile.

show abstract

“…Table 1 shows the coloring effect on dyed lyocell fabric samples using fi ve different mordanting agents in pre-mordanting and post-mordanting methods at the same temperature of 90 o C. Data color, SF-600 was used to measure the dye captivation concentration on the shallow of lyocell fabric. In addition, the ranges of color were also found different on lyocell fabric samples using L*, a*, b*, C*, and h values [30]. Table 2 shows the CIE Lab (L*, a*, b*, C*, and h*) values of dyed lyocell fabric samples at 90 o C. It is observed that the color shade values of lyocell fabrics with mordanting agent ferrous sulfate is higher in both mordanting methods as compared to the other mordanting agents used for dyeing.…”

Section: Coloring Effect Of Extracted Dye and Mordantsmentioning

confidence: 96%

Lyocell Fabric Dyed with Natural Dye Extracted from Marigold Flower Using Metallic Salts

Rashdi

Naveed

Sanbhal

et al. 2020

Autex Research Journal

View full text Add to dashboard Cite

The application of natural dyes is increasing each year due to their environmental friendliness and easy application on cellulose fibers. In this study, the natural dye from the Mexican marigold flower was extracted using a Soxhlet extraction apparatus. The extracted natural dye was applied on lyocell fabric with five different metallic salts using pre-mordanting and post-mordanting methods. It was observed that different color shade depth was achieved with different fixing agents. The color shade depth (K/S) washing fastness, light fastness, rubbing fastness, perspiration, and Fourier transform infrared (FTIR) test results of all dyed samples were excellent in both pre- and post-mordanting methods. There was no significant difference in the results between post- and pre-mordanting fixation methods. However, the results showed that mordant ferrous sulfate had higher K/S value as compared to all other mordants. The dye extracted from marigold flower showed good dyeing efficiency with mordant to excellent colorfastness tests. FTIR results showed that there was no structural change in lyocell fabrics, before and after dyeing processes. Thus, a natural dye extracted from marigold flower has shown good colorfastness properties without damaging its fiber structure.

show abstract

Dyeing Silk Fabric with Natural Dye from Longan Leaves Using Simultaneous Mordanting Method

Cited by 3 publications

References 7 publications

Study on Tencel Fabric Dyeing with Pomegranate Peel Natural Dyes

Study on Tencel Fabric Dyeing with Pomegranate Peel Natural Dyes

Coloring of Mahogany (Swietenia Macrophylla King.) on Textiles with Mordant Process and Fixation Against Fastness

Lyocell Fabric Dyed with Natural Dye Extracted from Marigold Flower Using Metallic Salts

Contact Info

Product

Resources

About