Effect of Additional Transmitting Coils on Transfer Distance in Multiple-Transmitter Wireless Power Transfer System

Abstract

Wireless power transfer (WPT) technology has been widely introduced and developed over the past few years. Nevertheless, the basic WPT configuration using one transmitting (Tx) coil and one receiving (Rx) coil still achieves very limited performance in terms of power transfer distance. To overcome this limitation, various multi-coil WPT systems using three or more coils have been studied. Among them, a multiple-input single-output (MISO) structure can provide the Rx with advanced freedom in an extensive lateral area. However, few studies have investigated how far multi-Tx coils can increase the transfer distance.In this paper, we analyze the transfer distance and lateral coverage based on the generalized critical coupling condition and system energy efficiency according to the number of additional Tx coils in the MISO WPT system. The results demonstrate that the MISO WPT system using planarly arranged Tx coils improves by barely 1% in the optimal transfer distance, which achieves the maximum output power condition in a single-Tx WPT system. To validate our analysis, the MISO WPT system with seven Tx coils and seven LCC inverters was implemented and its performance was assessed. The measured results agreed well with the theoretically calculated results.INDEX TERMS MISO, multiple transmitters, magnetic beamforming, system efficiency, transfer distance, wireless power transfer.

Inductive Power Transfer for Electric Vehicle Charging Applications: A Comprehensive Review

“…A three-coil design with an assistive coil for the CC-CV charging of a battery was proposed in [51]. To increase the transfer distance, a multi-transmitter coil system is proposed in [52]. In [53], a new coil design named RC has been proposed and compared with DD design.…”

Wireless charging systems for electric vehicles

“…If a large amount of flux is received by the receiver, then this means that the coupling between the coils is good. The distance between the coils has a direct impact on the system efficiency [54], as it limits the transmission of flux from the transmitter to the receiver [55,56]. If the distance between the coils increases beyond a certain limit, the coupling decreases and consequently, the working efficiency of the power transmission reduces.…”

A parabolic spiral coil transmitter with uniform magnetic field for smart devices

“…A coil array technology has been presented that uses multiple transmitter coils to extend the charging area and can charge multiple devices at arbitrary position [18,19,20,21,22]. However, the coil array uses multiple transmitter coils, complicated controls such as device detection and coil switching are required, the number of parts increases, and the cost increases.…”