Effect of B2O3 addition on the sintering temperature and microwave dielectric properties of Zn2SiO4 ceramics

Experimental determination of the liquidus temperatures of the binary (SiO2–ZnO) system in equilibrium with air

“…Glass-ceramics with ZnO are promising candidates in phosphors [4,5], industrial glazes [6]. Pure and doped Zn x SiO 4-x ceramics exhibit a low electric permittivity and a high Q × f value (Q, dielectric loss; f, resonant frequency), which fit well with the requirements of low temperature co-fired ceramics (LTCC) [7,8] and dielectric devices [9,10]. Accurate phase diagram and thermodynamic information of the SiO 2 -ZnO system are important factors in enhancing the performance of those applications.…”

Effect of two-step sintering on the microwave dielectric properties of Zn1.8SiO3.8 ceramics

“…Complete interaction between SiO 2 and ZnO was difficult owing to the very stable structure of crystalline SiO 2 , resulting in the formation of a ZnO secondary phase [20]. However, according to Nguyen et al [6], willemite ceramics composed of a single rhombohedral phase could be obtained by ZnO subtraction.…”

MICROSTRUCTURE, PHASE EVOLUTION, AND MICROWAVE DIELECTRIC PROPERTIES OF Li₂O AND Ga₂O ₃ DOPED ZINC ORTHOSILICATE

“…As shown in Table 1, the addition of various sintering aids allows to lower the sintering temperature of zinc orthosilicate based ceramics [6][7][8][9][10][11][12][13][14][15][16][17][18].…”