Effect of ore quality on non‐aqueous oil sand extraction performance

Abstract

Current commercial aqueous based extraction processes are energy and greenhouse gas (GHG) intensive and require large tailings ponds. Non‐aqueous extraction (NAE) of bitumen from mineable oil sands is an alternative that eliminates tailings ponds with potentially lower energy requirements and GHG emissions. The economics of the NAE process depend partly on the impact of ore quality on bitumen recovery and product quality (low water and solids content). It has been claimed that NAE performance is insensitive to the quality (bitumen content) of the oil sand ores. However, the available data are ambiguous because different extraction methods and solvents were used in different studies and, in many cases, a limited range of ore qualities was examined. In this study, bitumen was extracted from eight ores of different quality with cyclohexane using a multistage method equivalent to a countercurrent process with a solvent/ore ratio of 0.67 w/w. The bitumen recovery and the water and solids content of the product bitumen were determined for each ore. It was found that bitumen recovery correlated negatively to clay content of the ore. The loss of recovery was attributed to bitumen adsorption on clays. The product quality was insensitive to the ore quality and instead depended on the density of the fluid medium, as expected with a centrifuge‐based separation method. The recovery and product quality from the NAE method were similar to those from aqueous extractions.