Energy Harvesting Floor Tile Using Piezoelectric Patches for Low-Power Applications

Abstract

Purpose One of the sustainable energy sources derived from kinetic energy is human footsteps. This research sought to find a substitute for conventional power sources to lessen dependence on them. As a result, a floor tile excited by human footsteps was demonstrated and presented to generate usable electrical power. Methods Piezoelectric patches, hot melt glue sticks, wood plates, and foam plates are just a few of the commercially available materials used in the suggested technique, making it suitable and practical. In addition to the components, uncomplicated circuits like a voltage multiplier and rectifier with a capacitance filter were employed for the electrical power capture. The proposed prototype has a length of 455 mm and a width of 405 mm. Results Two LEDs were effectively illuminated as an actual load using electrical energy collected from human footsteps. The maximum useful power that could be harvested successfully via the proposed floor tile (one tile) was 246 mW, with an approximate cost of $10.2. Conclusions Designing an array of footsteps-based energy harvesting tiles covering broad areas to maximize the harvested power could be considered as a future work. Moreover, the number of pedestrians variable can be also studied for the proposed design of this study in a real excitation environment such as a railway station, subway station, street, discotheque, and wedding festival hall.