EPDM/polyamide TPV compatibilized by chlorinated polyethylene

Liu, Xin; Huang, Hua; Xie, Zhijie; Zhang, Yong; Zhang, Yinxi; Kim, Sun; Min, LiNa

doi:10.1016/s0142-9418(02)00035-1

Cited by 52 publications

(22 citation statements)

References 7 publications

Supporting

Mentioning

Contrasting

Unclassified

Order By: Relevance

“…The α-relaxation is related to the Brownian motion of the main chain associated with the glass transition and its relaxation of segments associated with it. In the glass transition region, α-relaxation time of the composites was investigated by measuring at defined frequency response of the composites [16,17]. The temperature dependence of the tan σ determined from the DMA curves of the asprepared LGF/ER/TPU/PMMA composites is shown in Figure 3, when the scanning frequency of the LGF/ER/ TPU/PMMA composites is 1 Hz.…”

Section: Dma Of the Lgf/er/tpu/pmma Compositesmentioning

confidence: 99%

Preparation and properties of LGF/ER/TPU/PMMA composites

Guo

Zhang

Shao

et al. 2015

Science and Engineering of Composite Materials

View full text Add to dashboard Cite

A series of long glass fiber (LGF)-reinforced epoxy resin (ER), thermoplastic polyurethane (TPU) elastomers, and poly(methyl methacrylate) (PMMA) composites were prepared by using self-designed impregnation device. Dynamic mechanical properties of the LGF/ER/ TPU/PMMA composites have been investigated by using dynamic mechanical thermal analysis (DMA). The results indicated that the content of PMMA and TPU and scanning frequency had important influence on dynamic mechanical properties and glass transition of the LGF/ER/ TPU/PMMA composites. In addition, the Arrhenius relationship has been used to calculate the activation energy of α-transition of the LGF/ER/TPU/PMMA composites. The thermal properties of the LGF/ER/TPU/PMMA composites were studied by thermogravimetric analysis (TGA). Morphology and mechanical properties of the composites are investigated by scanning electron microscopy (SEM), a universal testing machine, and a ZBC-4 Impact Pendulum.

show abstract

Section: Dma Of the Lgf/er/tpu/pmma Compositesmentioning

confidence: 99%

Preparation and properties of LGF/ER/TPU/PMMA composites

Guo

Zhang

Shao

et al. 2015

Science and Engineering of Composite Materials

View full text Add to dashboard Cite

show abstract

“…The improvement of various mechanical properties of HIPS/EVA/WGRT composites is clearly due to the incorporation of SBS block copolymer. Usually, in the presence of a compatibilizer at the interface of TPEs based on thermoplastic/rubber composites, the rubber phase can be finely dispersed and the interface interaction can be enhanced [30,31]. For the WGRT powder, the main component is crosslinked rubber, carbon black, filler and other additives, moreover, styrene-butadiene rubber (SBR) and natural rubber (NR) are the main rubber component in WGRT powder.…”

Section: Influence Of Sbs On the Mechanical Property Of The Hips/eva/mentioning

confidence: 99%

Thermoplastic elastomer based on high impact polystyrene/ethylene-vinyl acetate copolymer/waste ground rubber tire powder composites compatibilized by styrene-butadiene-styrene block copolymer

Wang

Zhang

et al. 2012

Materials Chemistry and Physics

View full text Add to dashboard Cite

“…2. The glass transition temperature of a polymer is usually taken from the peak position of tan d or loss modulus versus temperature curves [11,12] .…”

Section: Dynamic Mechanical Relaxation Studies Of Hybrid Materialsmentioning

confidence: 99%

Dynamic Mechanical Properties of PPESK/Silica Hybrid Materials

Xing

Liao

et al. 2009

Polymer-Plastics Technology and Engineering

View full text Add to dashboard Cite

A series of poly (phthalazinone ether sulfone ketone) (PPESK)/ silica hybrid materials with different contents of SiO 2 was prepared by sol-gel process with soluble poly (phthalazinone ether sulfone ketone) and SiO 2 sol in NMP solution. Dynamic mechanical properties of PPESK/SiO 2 hybrid uniform coatings have been investigated by using dynamic mechanical thermal analysis (DMTA). The results indicated that SiO 2 content and scanning frequency had some effect on dynamic mechanical properties and glass transition of PPESK/SiO 2 hybrid materials. The glass transition temperature dependence of dynamic mechanical properties of PPESK/silica hybrid composites were significantly enhanced as the SiO 2 content was increased and reached maximum as 25 wt% SiO 2 was loaded into the PPESK matrix. The damping peaks were found to increase with increasing of SiO 2 content and move to high temperature. Increasing of scanning frequencies, the damping peaks of hybrid materials shift to high temperature. In addition, the Arrhenius relationship has been used to calculate the activation energy of a-transition of PPESK/SiO 2 hybrid composites.

show abstract

EPDM/polyamide TPV compatibilized by chlorinated polyethylene

Cited by 52 publications

References 7 publications

Preparation and properties of LGF/ER/TPU/PMMA composites

Preparation and properties of LGF/ER/TPU/PMMA composites

Thermoplastic elastomer based on high impact polystyrene/ethylene-vinyl acetate copolymer/waste ground rubber tire powder composites compatibilized by styrene-butadiene-styrene block copolymer

Dynamic Mechanical Properties of PPESK/Silica Hybrid Materials

Contact Info

Product

Resources

About