Ergonomic Analysis of Working Postures in a Foundry Workshop by Digital Human Modeling Based REBA Method

Abstract

Bir döküm atölyesindeki çalışma duruşlarının dijital insan modelleme tabanlı REBA yöntemi ile ergonomik analizi Ergonomic analysis of working postures in a foundry workshop by digital human modeling based reba method Yazar(lar)

Investigation of The Posture Positions of The Apparel Workshop Employees with The REBA and RULA Method

“…The risks identified in the ergonomic risk analysis applied to the logistics sector by Kırcı and his colleagues indicate that there are 7 high-risk and 5 very high-risk working postures compared to those working in the textile sector, that those who do the work of pushing, pulling, lifting the load work in more dangerous jobs, and that the logistics sector is a more dangerous line of business. When the level of risks obtained as a result of the examination of the posture positions of the employees doing the cleaning work during the cleaning of outer glass and inner glass, sweeping and wiping of the floor is examined by Özay and Özcan, with the reveal of 4 medium risk 1 low risk risk levels it was determined that the risk levels of the posture positions of the employees in the textile sector with the cleaning workers are examined were close to each other [26].By examining the postures of the employees working in the ladle preparation process in the casting workshop with the Digital Human Modeling simulation in the CATIA V5 software by Erdemir and Eldem, the use of the Rapid Entire Body Assessment method which is an ergonomic risk assessment method, with the digital method, increases the accuracy of the study [5].When the studies in the literature are examined, it has been determined that the risks vary according to the basis of the work done.It has been determined that there are posture positions that include high and very high risks in the very dangerous line of business, medium and low risks in the works in the dangerous line of business, and more low risks and moderate risks in the less dangerous lines of business.…”

“…Prolonged working hours, faulty postures, nonergonomic weight lifting motions and repetitive motions causing physical and mental fatigue are all known to cause occupational diseases [4,5]. It's crucial to study employees' structural and psychological properties.…”

Tekrarli Manuel İşlerde Fi̇zyoloji̇k Zorlanmalarin Değerlendi̇ri̇lmesi̇ Ve Önlenmesi̇

“…Bu çalışmalara ilave olarak imalatta hem postür analizi (REBA ya da RULA) yöntemi hem de CATIA digital insan modelleme aracı birlikte kullanılabilmektedir. (Şahin vd., 2017;Erdemir ve Eldem, 2020;Top, 2019;Top vd., 2021;Kumar ve Singh, 2018;Eldem vd., 2019;Golabchi vd., 2018;Gonen vd., 2016;Eldem vd., 2017;Liang vd., 2016).…”

18-65 Yaş Arasi Ki̇şi̇leri̇n Antropometri̇k Veri̇leri̇ni̇n Beli̇rlenmesi̇ Üzeri̇ne Bi̇r Alan Araştirmasi: Yükseköğreti̇m Kurumu Uygulamasi

“…Bulunulan ortamda konforu sağlayacak unsur sadece masa, sandalye gibi ofis araçları olmamakla beraber ortamın düzenlenmesi, kullanılan dijital araç gereçlerde yer alan yazılımlar gibi daha uç örnekler de bu unsurlar içerisinde yer almaktadır (Erdemir ve Eldem, 2019). Aslında burada en önemli konu ergonomi biliminin tüm alt çalışma alanları ile hayatımıza dahil olması gerektiğidir.…”