Estimation of Silting Evolution in the Camastra Reservoir and Proposals for Sediment Recovery

Abstract

The reduction in the usable capacity of reservoirs, which is linked to the ongoing silting phenomenon, has led to the need to remove sediments to allow the storage of greater quantities of water resources. At the same time, however, the removal of sediment from the bottom results in the need to manage a large quantity of materials, for which the current prospect of discharge is both economically and environmentally unsustainable. This research work concerns the assessment of the silting volume increment of the Camastra reservoir and the phenomenon of progressing speed based on topographic and bathymetric surveys carried out in September 2022 through the use of a DJI Matrice 300 RTK drone with ZENMUSE L1 LiDAR technology, multibeam surveys, and geophysical prospecting using a sub-bottom profiler. It was possible to estimate the increase in dead volume and compare this value with that obtained from the surveys through a literature calculation model and previous silting data. The used model, which slightly underestimates the silting phenomenon, estimates the volume of accumulated sediment from the original capacity of the reservoir, which is understood as the volume that can be filled with sediment in an infinite time, from which an amount is removed depending on the characteristic time scale of reservoir filling and the level of complexity of the silting phenomenon for a specific reservoir. Furthermore, there is evidence of an increase in the speed of sediment accumulation, which is linked to the more frequent occurrence of high-intensity and short-duration meteoric events caused by climate change, which can lead to an increase in erosion and transport phenomena. Further evidence is provided by the occupation of approximately 50% of the Camastra’s reservoir capacity, which makes sediment dredging policies and interventions a priority, contributing to the practical significance of the present study. In this regard, the main recovery and reuse alternatives are identified and analyzed to make the removal of accumulated material environmentally and economically sustainable, such as through environmental and material recovery applications, with a preference for applications for which sediment pretreatment is not necessary.