Evaluarea Solicitărilor Termice Și a Duratei De Viață a Transformatoarelor De Distribuție Aflate În Regim Periodic Nesinusoidal

Abstract

Electrical transformers are some of the most important equipment in the entire electricity distribution chain. Their operation with optimal values of the parameters (electrical, thermal and mechanical) ensures the continuous supply of consumers. The modern electrical loads of power distribution transformers are often nonlinear and generate several power quality problems, especially the distortion of the waveform of the current that flows through the windings of the transformer. This generates additional stresses (electrical and thermal) of the various components of the transformer (originally designed to operate in pure sinusoidal mode) which can cause abnormal (faulty) operation of the transformer and ultimately reducing its life (estimated by the manufacturer for permanent sinusoidal regime). In order to prevent or diminish the negative effects of the nonsinusoidal regime on the transformer, a deliberate limitation (reduction) of its maximum load is performed. The procedure is known as transformer derating. Its main aim is to establish the most appropriate declassification factors (denomination), resulting from the correlation of the nominal and constructive data of the transformer with the power quality parameters, measured in its secondary part (usually, these are the current distortion level and the corresponding spectrum harmonic). This paper analyzes qualitatively and quantitatively these aspects and proposes a downgrading procedure for in-service transformers which it illustrates in a case study.