Fault distance measurement method for wind power transmission lines based on improved NSGA II

Abstract

A fault distance measurement method that is suitable for long-distance wind power transmission lines is proposed by this paper. By combining the voltage and current at both ends of the line during normal operation, a dynamic line parameter correction method based on improved NSGAⅡ is proposed to ensure measurement errors caused by parameter changes are avoided. Based on the construction of the fault distance measurement function, a global optimization method that is based on adaptive golden section search is proposed, where only the power frequency measurement data at both ends of the bus is required and synchronization is not required for the measurement of fault distance. A large number of experimental results demonstrate that the method this paper proposes is highly adaptable, with a relative distance measurement error of less than 0.2km, and high accuracy is maintained in distance measurement even with certain degrees of noise interference.