Functionalized Biochars as Supports for Ru/C Catalysts: Tunable and Efficient Materials for γ-Valerolactone Production

Abstract

Cotton stalks-based biochars were prepared and used to synthetize Ru-supported catalysts for selective production of γ-valerolactone from levulinic acid in aqueous media. Different biochars’ pre-treatments (HNO3, ZnCl2, CO2 or a combination of them) were carried out to activate the final carbonaceous support. Nitric acid treatment resulted in microporous biochars with high surface area, whereas the chemical activation with ZnCl2 substantially increases the mesoporous surface. The combination of both treatments led to a support with exceptional textural properties allowing the preparation of Ru/C catalyst with 1422 m2/g surface area, 1210 m2/g of it being a mesoporous surface. The impact of the biochars’ pre-treatments on the catalytic performance of Ru-based catalysts is fully discussed.

Catalytic Valorisation of Biomass-Derived Levulinic Acid to Biofuel Additive γ-Valerolactone: Influence of Copper Loading on Silica Support

“…The choice of catalyst significantly impacts the yield and selectivity of GVL production. Catalysts commonly used include metal catalysts (e.g., iridium (Ir) [12][13][14], palladium (Pd) [15], platinum (Pt) [16], and ruthenium (Ru) [17][18][19], Raney nickel (Ni) [20], etc.) supported on appropriate substrates (alumina, zirconia, alumina titania, niobia, etc.)…”