Fuzzy-Based Fifteen-Level VSC for STATCOM Operations with Single DC-Link Voltage

Abstract

A static synchronous compensator (STATCOM) is a powerful mechanism for balancing reactive power and uplift voltage stability in a transmission system. Nowadays, the desire to save energy by reducing losses is prioritized as an essential target instead of increasing the power generation for the sustainability of any nation’s growth plans. As a result, power-electronics-based converters are more significant for power savings in transmission systems. STATCOM based on voltage source converters (VSC) are operated to improve on stable performance conditions as well as to minimize the harmonic distortions in a power system. Hence, this paper explores low harmonic distortions of fifteen-level VSC structured STACOM using only one DC-link voltage to balance the reactive power and to manage the voltage profile in large power transmission systems. STATCOM consisting of H-bridge type VSCs and binary weighted transformers was utilized to maintain an AC system voltage at 132 kV, 50 Hz. The three stages of VSCs were operated with meticulous firing angles based on converter levels for controlling THD (total harmonic distortion) and providing system improvement. The proposed model of the fifteen-level H-bridge type voltage source converters with fuzzy logic decoupled control algorithm based STATCOM can be used for large power range applications with a small number of switches. This model attained stable operation of the system with a low harmonic deviation at any dynamical conditions. The simulation results using MATLAB showed that the system’s operation was enhanced, with a smoother response and improved steady state performance.

Optimal Location and Sizing of a D-STATCOM in Electrical Distribution Systems to Improve the Voltage Profile Considering the Restriction of Harmonic Injection through the JAYA Algorithm

“…These devices can be incorporated into all nodes of the system. However, an inadequate location can become counterproductive for the system's proper operation [6,7].…”