Gas–Water Two-Phase Displacement Mechanism in Coal Fractal Structures Based on a Low-Field Nuclear Magnetic Resonance Experiment

Abstract

In this paper, the gas–water two-phase seepage process under a real mechanical environment is restored by a nuclear magnetic resonance experiment, and the gas–water two-phase distribution state and displacement efficiency in coal with different porosity under different gas injection pressures are accurately characterized. The fractal dimension of liquid phase distribution under different gas injection pressures was obtained through experiments, and the gas–water two-phase migration law is inverted according to it. Finally, the gas–water two-phase migration mechanism inside the fractal structure of coal was obtained. The results are as follows: 1. Gas will first pass through the dominant pathway (the composition of the dominant pathway is affected by porosity) and it will continue to penetrate other pathways only when the gas injection pressure is high. When the gas injection pressure is low, the displacement occurs mainly in the percolation pores. With the increase in gas injection pressure, the focus of displacement gradually shifts to the adsorption pore. 2. As the gas injection pressure increases, the displacement efficiency growth rate is relatively uniform for the high-porosity coal samples, while the low-porosity coal samples show a trend of first fast and then slow growth rates. When the gas injection pressure reaches 7 MPa, the displacement efficiency of high-porosity coal samples exceeds that of low-porosity coal samples. 3. With the increase in gas injection pressure, the fractal dimension of the adsorption pore section and the seepage pore section shows an increasing trend, but the fractal dimension of the adsorption pore section changes faster, indicating that with the increase in gas injection pressure, gas–water two-phase displacement mainly occurs in the adsorption pore section.

Changes in the Microstructure and Wettability of Water-Containing Coal after Hot Flue Gas (CO2–N2) Injection

“…To promote the efficiency of gas drainage from coal seams, scholars all over the world have developed a series of methods and technologies to enhance the permeability of coal seams. − Among them, some simple and effective hydraulic measures, including hydraulic fracturing, hydraulic cutting, and hydraulic flushing, have been used extensively. Nevertheless, a large quantity of liquid water needs to be injected into coal seams in the process of implementing hydraulic measures.…”