Health Risk Assessment of Some Heavy Metals in Lipsticks Sold in Local Markets in Iraq

Abstract

Heavy metals found in cosmetics are a safety threat to the health of consumers. Therefore, in this study, we evaluated the levels of heavy metals such as cadmium (Cd), chromium (Cr), copper (Cu), lead (Pb), zinc (Zn), and arsenic (As) in lipstick makeup. The level of heavy metals in lipstick was discovered by using an analytical technique with high selectivity and sensitivity, namely atomic absorption spectrometry. Twenty lipsticks were selected from the same brands, yet differing in price. Ten original (expensive) and ten knockoff (cheap) lipsticks were chosen from shops in Diyala, Iraq. The detection-limit (LOD) was in between 0.01 and 0.1, the quantification-limit (LOQ) was within 0.03 and 0.33, the recovery values (Rec.%) ranged from 100.17% to 101.1%, the RE values were 0.81%, and the RSD values were 1.33%. The results also revealed that the levels of metals are in the order of Pb > Cd > Zn > Cu > As > Cr. However, the levels of heavy metals that were estimated in this study were less than the permissible limit set by the executive authorities, so there seems to be no concern associated with these heavy metals. However, the daily and frequent use of lipstick by women exposes them to low levels of toxic metals as these metals accumulate over time and pose adverse effects on the health of the users. The results of the hazard quotient (HQ) and health risk index (HI) indicate there was no harmful effect on human health related to heavy metals present in lipstick. Whereas the results of the biological activity of the samples indicated that there was no bacterial growth in expensive samples, cheap samples were contaminated with some types of organisms; this indicates poor quality.

Determination of Cd, Co, Cr, Ni and Pb metals in lipsticks samples by Flame atomic absorption spectrophotometry (FAAS)

“…To eliminate unwanted components, the resulting solution was filtered through whatman filter paper (No.40), yielding a final solution to determine the metals. A control solution prepared in the same manner was used as a reference 12,13 .…”