High frequency wire bonding for PBGA package, a process optimisation approach

Purpose This study aims to investigate the design configuration for an optimum solder height of reinforced SAC305 solder joint in an ultra-fine capacitor assembly. Design/methodology/approach A multiphase finite volume model is developed for reflow soldering simulations to determine the fillet height of reinforced SAC305 solder joint in an ultra-fine capacitor assembly. Different solders, namely SAC305-x, SAC305-xNiO and SAC305-xTi, with varying percentage weight compositions of nanoparticles (x = 0 Wt.%, 0.01 Wt.%, 0.05 Wt.%, 0.10 Wt.%, 0.15 Wt.%) are investigated. A reflow soldering experiment is also conducted, and the cross-sections of the reflowed packages are examined using a High-Resolution Transmission Electron Microscope (HRTEM). The optimum design configurations (nanoparticle composition and material) for the solder fillet height are investigated using the Taguchi orthogonal array method. Findings Good correlations were recorded between the HRTEM micrographs and the numerical predictions of the nanoparticles' distribution in the molten solder. The numerical prediction of the fillet height also agrees with the experiment, with a maximum disparity of 5.43%. It was found that Ti nanoparticles, having the smallest density compared to NiO and, exhibit the highest buoyancy effect in the molten solder. The Taguchi analysis revealed that the nanoparticles' material factor is more significant than the Wt.% factor for an optimum fillet height. An optimum design configuration for fillet height was established as SAC 305–0.15 Wt.% Ti, corresponding to a 41.13% improvement of the plain SAC 305 solder. Practical implications The fillet height of solder joints greatly influences the solder joint reliability of miniaturized electronic packages. Solder joint reliability of ultra-fine capacitors can be improved using this study's findings on the optimum design configuration for the capacitor's solder fillet. The study’s findings can be practically implemented in industries such as electronics manufacturing, where enhanced solder joint reliability is critical. Originality/value Investigation of the optimum design configuration for reinforced SAC305 solder fillet is almost nonexistent in the literature. This study explored the optimization of fillet height of reinforced SAC305 solder joints in miniaturized capacitor assembly.

show abstract

Thermo-mechanical challenges of reflowed lead-free solder joints in surface mount components: a review

Lau¹,

Khor

Soares

et al. 2016

SSMT

View full text Add to dashboard Cite

Purpose The purpose of the present study was to review the thermo-mechanical challenges of reflowed lead-free solder joints in surface mount components (SMCs). The topics of the review include challenges in modelling of the reflow soldering process, optimization and the future challenges in the reflow soldering process. Besides, the numerical approach of lead-free solder reliability is also discussed. Design/methodology/approach Lead-free reflow soldering is one of the most significant processes in the development of surface mount technology, especially toward the miniaturization of the advanced SMCs package. The challenges lead to more complex thermal responses when the PCB assembly passes through the reflow oven. The virtual modelling tools facilitate the modelling and simulation of the lead-free reflow process, which provide more data and clear visualization on the particular process. Findings With the growing trend of computer power and software capability, the multidisciplinary simulation, such as the temperature and thermal stress of lead-free SMCs, under the influenced of a specific process atmosphere can be provided. A simulation modelling technique for the thermal response and flow field prediction of a reflow process is cost-effective and has greatly helped the engineer to eliminate guesswork. Besides, simulated-based optimization methods of the reflow process have gained popularity because of them being economical and have reduced time-consumption, and these provide more information compared to the experimental hardware. The advantages and disadvantages of the simulation modelling in the reflow soldering process are also briefly discussed. Practical implications This literature review provides the engineers and researchers with a profound understanding of the thermo-mechanical challenges of reflowed lead-free solder joints in SMCs and the challenges of simulation modelling in the reflow process. Originality/value The unique challenges in solder joint reliability, and direction of future research in reflow process were identified to clarify the solutions to solve lead-free reliability issues in the electronics manufacturing industry.

show abstract

High frequency wire bonding for PBGA package, a process optimisation approach

Cited by 4 publications

References 2 publications

Optimization of reflow soldering process for BGA packages by artificial neural network

Optimization of reflow soldering process for BGA packages by artificial neural network

Numerical modeling and optimization of fillet height of reinforced SAC305 solder joint in an ultra-fine capacitor assembly

Thermo-mechanical challenges of reflowed lead-free solder joints in surface mount components: a review

Contact Info

Product

Resources

About