Homogenizing the Electron Extraction via Eliminating Low‐Conductive Contacts Enables Efficient Perovskite Solar Cells with Reduced Up‐Scaling Losses

Abstract

Maintaining the power conversion efficiency (PCE) of perovskite solar cells (PSCs) while enlarging the active area is necessary for their industrialization, where the key part is the uniform carrier extraction. Here, a conformal electron transport layer (ETL) is reported with eliminated low‐conductive contacts through a tailored deposition that combines chemical bath deposition and modified spin‐coating on a light‐managing textured substrate. The KPFM and C‐AFM are utilized to prove the uniform and optimized electrical properties. This study further employs the 2D measurements of PL and TRPL mapping to focus on revealing the enhanced uniformity of electron extraction. The uniform ETL conductivity and electron extraction contribute to a substantial decrease in device up‐scaling losses, making the δPCE ( between 0.08 cm2‐device and 1 cm2‐device decrease from 5.02% to 2.97%, while the perovskite film is deposited using two‐step method. When using one‐step method to deposit perovskite film, PCEs of 25.13% and 23.93% for the active area of 0.08 cm2 and 1 cm2 are achieved, and the δPCE decreases from 7.89% to 4.77%, validating the significant effects on reducing up‐scaling losses. This work provides a new perspective to maintain high efficiency while device up‐scaling, providing more opportunities to push forward the PSCs industrialization.