Hydrogen production by ethanol decomposition and partial oxidation over copper/copper-chromite based catalysts prepared by combustion synthesis

Correlation between Structural and Catalytic Properties of Copper Supported on Porous Alumina for the Ethanol Dehydrogenation Reaction

“…It has already been reported that the use of supported copper catalysts for this reactionc an lead to the productiono fs ubstances with high added value, such as H 2 ,a cetaldehyde, and ethyl acetate. [9][10][11][12] The aim of this work was to establish ar elationship between the structural properties of the catalysta nd its catalytic activity.A ni n-depth investigation was made of the influence of the poroust exture of the alumina on the properties and dispersion of copperspecies at the surfaces of the catalysts, during different stages of their lifespan (as-prepared and after reductive activation).…”

Numerical Study of the Performance and Emission of a Diesel‐Syngas Dual Fuel Engine

“…Consequently, carbon dioxide emission can be reduced effectively by the combination of the syngas generation process through biomass fermentation and syngas addition to the engine, as carbon mainly comes from biomass. The approach of such combination is particularly attractive in power plants and other places with stationary combustion equipment [1][2][3][4]. Actually, syngas can be generated from a lot of raw materials, including biomass fermentation, methane steam reforming, ethanol steam reforming, autothermal reforming of fossil fuel, partial oxidation of methane, ammonia cracking, and so forth, and the components of syngas obtained from different materials and devices may vary greatly.…”

Study the Effect of Added 4wt% of Nickel Oxide, Ammonium Oxide and Cobalt Oxide over HZSM-5 Catalyst for the Catalytic reaction of Bio-Ethanol into Hydrocarbons

“…Preparation of HZSM-5 catalyst by 4 wt% nickel oxide, ammonium oxide and cobalt oxide increases the conversion and product yield of hydrocarbons particularly light olefins. Using impregnation method technique ZSM-5 catalyst has been modified by loading with different weight percent of metals [1][2][3][4][5][6].…”

“…Catalytic dehydration of ethanol to ethylene and ethanol to aromatics are some of studies in this direction [1][2][3][4]. Conversion of ethanol to hydrocarbons over zeolite has been studied due to increase demand of hydrocarbons in the market [5][6][7][8][9][10][11][12][13][14].…”