ICONE11-36320 A Feasibility Study on the Pb-Bi cooled Direct Contact Boiling Water Fast Reactor

Uchida, Shouji; Osada, Hiroo; Kasahara, Yoshiyuki; Takahashi, Minoru; Hata, Kouji

doi:10.1299/jsmeicone.2003.163

“…One of the key issues for the development of leadbismuth (Pb-Bi) cooled fast breeder reactors (FBRs) 1,2) is the compatibility of core and structural materials with Pb-Bi flow at high temperature. 3) According to Gorynin et al, 4) the compatibility of steels with Pb-Bi is dominated by two types of corrosion, i.e.…”

Section: Introductionmentioning

confidence: 99%

Corrosion of Steels in Lead-Bismuth Flow

Kondo

¹

,

Takahashi

²

,

Sawada

³

et al. 2006

J. Nucl. Sci. Technol.

Self Cite

View full text Add to dashboard Cite

For the development of lead-bismuth (Pb-Bi) cooled fast breeder reactors, the corrosion characteristics of various steels in a flowing Pb-Bi were investigated by means of steel corrosion test performed in the flowing Pb-Bi for 1,000 h. It was found that liquid metal corrosion was inhibited by single or multiple oxide layers formed on the steel surfaces. The oxide layers can be classified to an inner layer and an outer one. The existence of the inner oxide layer might be more important for the corrosion resistance since the inner one was compact and stuck to the steel surface while the outer one was easily broken into small pieces with cracks and peeled from the substrate. The effect of Cr content in steels on corrosion resistance was investigated. Stable Cr rich oxide layers were easily formed on the high Cr steels. The weight losses were lower in the steels with higher Cr contents. The content of Cr in the steel was effective to form the thin and compact Cr-rich oxide layer and suppressed the corrosion. In the case of Si rich steel, the weight loss was lower than the trends of weight loss with Cr content.

show abstract

“…One of the key issues for the development of leadbismuth (Pb-Bi) cooled fast breeder reactors (FBRs) 1,2) is the compatibility of core and structural materials with PbBi flow at high temperature. 3) According to Gorynin et al,4) the compatibility of steels with Pb-Bi is dominated by two types of corrosion, i.e.…”

Section: Introductionmentioning

confidence: 99%

Corrosion of Steels in Lead-Bismuth Flow

Kondo

¹

,

Takahashi

²

,

Sawada

³

et al. 2006

Journal of Nuclear Science and Technology

Self Cite

View full text Add to dashboard Cite

For the development of lead-bismuth (Pb-Bi) cooled fast breeder reactors, the corrosion characteristics of various steels in a flowing Pb-Bi were investigated by means of steel corrosion test performed in the flowing Pb-Bi for 1,000 h. It was found that liquid metal corrosion was inhibited by single or multiple oxide layers formed on the steel surfaces. The oxide layers can be classified to an inner layer and an outer one. The existence of the inner oxide layer might be more important for the corrosion resistance since the inner one was compact and stuck to the steel surface while the outer one was easily broken into small pieces with cracks and peeled from the substrate. The effect of Cr content in steels on corrosion resistance was investigated. Stable Cr rich oxide layers were easily formed on the high Cr steels. The weight losses were lower in the steels with higher Cr contents. The content of Cr in the steel was effective to form the thin and compact Cr-rich oxide layer and suppressed the corrosion. In the case of Si rich steel, the weight loss was lower than the trends of weight loss with Cr content.

show abstract

“…2) A Pb-Bi forced convection test loop 3) has been used to carry out a series of steel corrosion and flow technology tests [4][5][6] for the feasibility study of a Pb-Bi-cooled small fast reactor. 7) Previous studies have shown that LMC or oxidation corrosion occurs in steels in Pb-Bi at high temperature depending on the oxygen concentration in the liquid Pb-Bi, 4,8,9) although Pb-Bi is not so corrosive at low temperature no matter what the oxygen concentration is Refs.…”

Section: Introductionmentioning

confidence: 99%