Image Analysis Based Evaluation of Print Quality for Inkjet Printed Structures

Abstract

Inkjet printing for printed electronics is a growing market due to its advantages, including scalability, various usable materials and its digital, pixel based layout design. An important quality factor is the wetting of the ink on the substrate. This article proposes a workflow to evaluate the print quality of specific layouts by means of image analysis. A self-developed image analysis software, which compares a mask with the actual layout, enables a pixel-based analysis of the wetting behavior by the implementation of two parameters called over- and underwetting rate. A comparison of actual and targeted track widths can be performed for the evaluation of different parameters, such as the tested plasma treatment, drop spacing (DS) and substrate temperature. To prove the functionality of the image analyses tool, the print quality of Au structures inkjet printed on cyclic olefin copolymer (COC) substrates was studied experimentally by varying the three previously mentioned parameters. The experimental results showed that the wetting behavior of Au ink deposited on COC substrates influences various line widths differently, leading to higher spreading for smaller line widths. The proposed workflow is suitable for identifying and evaluating multiple tested parameter variations and might be easily adopted for printers for in-process print quality control in industrial manufacturing.

A novel CuFe2O4 ink for the fabrication of low-temperature ceramic fuel cell cathodes through inkjet printing

“…In addition, the Samba cartridge has a higher drop placement accuracy, providing a more homogenous coating compared to the DMP cartridge. 89 The lower R Ohm of Ink (2) – Samba can be attributable to the smaller particle size distribution which improved the electrode/electrolyte interface. 79…”