Impact of Temperature Variations on the Hydro-Mechanical Parameters of a Sensitive Soil

Abstract

The incorporation of heat exchangers in geostructures produces a cyclic variation of the temperature in the adjacent soil. Therefore, there are important questions about the effect of temperature variations on hydro-mechanical soil parameters. In this study, mini-pressuremeter tests were conducted in laboratory on a homogeneous material submitted to different thermal loading (1 to 40 °C). The tested material, an illitic soil, is compacted in a thermo-regulated container with 0.6 m diameter and 0.8 m height, at optimal water content (31.3 %) and 90% of maximum dry density (1.29 Mg/m 3). Only six tests are performed in each container to prevent edge effects and the influence between the tests. The impact of temperature variation on creep pressure (pf), limit pressure (pl) and pressuremeter modulus (Ep) were determined. A decrease in creep pressure and limit pressure with increasing temperature was observed, while the variation of pressuremeter modulus was less pronounced. The first cycle induced more important parameter variations than the subsequent cycles.