Improve the bonding material properties used to strengthen concrete beams

Abstract


 
 
 
 The subject of the research deals with the study of the effect of recycling and addition of some cheap and locally available materials on the properties of the adhesive material (Epoxy) used to strengthen concrete beams. Where the study included the addition of glass powder, brick powder and porcelain powder to the adhesive material and with different ratios of the weight of the adhesive material (0, 0.25, 0.5, 0.75, 1 and 1.25). After conducting laboratory tests proved the results of the study that the best types of additions are porcelain powder and the best ratio of adding was about ( 0.25). This addition to the adhesive material in this ratio led to improve the reaction temperature at mixing the parts of the adhesive material where decreased by 15.56%, as well as improved workability through lower flow of the consistency of adhesive material about 7.89%, as increased compressive strength by 13.33% and improved the modulus of elasticity by11% only, but The modulus of rupture decreased by 7.04% and the strength to high temperatures (limit to 250C°) decreased by 29.17%. The new bonding material was tested to strengthen the CFRP concrete beams. The results showed that the compressive strength of these beams increased by 70.97% compared to the normal non-reinforced beams and the strength of the Toughness beams increased by 61.87%.
 © 2018 JASET, International Scholars and Researchers Association