Improved assembly DC circuit breaker based on resonant current injection

Abstract

DC circuit breakers (DCCBs) with high breaking capacity and low cost are necessary for quick fault clearance in DC networks. The assembly DC circuit breakers (ADCCBs) have a main breaking section (MBS) and a sub-breaking sections (SBS) for each line, which greatly reduce the cost. But in conventional operation, it bears high voltage for a long time when there is a main switch grounding process in any line fault action. To address this problem, a multiport assembly circuit breaker based on current injection (CI-MPACB) is proposed, which is able to generate a resonant current with increasing amplitude by controlling the duty cycle of Integrated Gate-Commutated Thyristors (IGCTs). Then the resonant current is injected into the SBS to generate current zero crossing and arc extinction. A complex frequency domain circuit analysis is performed on the MBS to describe the action logic as well as the commutation characteristics. In addition, the parameters of each component of the MBS are subject to multiple constraints and reasonable design to ensure the fault current could be cut off quickly and reliably. The cost of existing design is greatly reduced due to the design idea of resonant current injection device parameter selection. Finally, a PSCAD/EMTDC simulation confirms the opening viability of CI-MPACB and the accuracy of the parameter design. The test results show that the designed CI-MPACB can cut off DC fault lines.