In-Channel Electrochemical Detection for Microchip Capillary Electrophoresis Using an Electrically Isolated Potentiostat

Abstract

A new electrode configuration for microchip capillary electrophoresis (CE) with electrochemical (EC) detection is described. This approach makes it possible to place the working electrode directly in the separation channel. The "in-channel" EC detection was accomplished without the use of a decoupler through the utilization of a specially designed, electrically isolated potentiostat. The effect of the working electrode position on the separation performance (in terms of plate height and peak skew) of poly(dimethylsiloxane)-based microchip CEEC devices was evaluated by comparing the more commonly used end-channel configuration with this new in-channel approach. Using catechol as the test analyte, it was found that in-channel EC detection decreased the total plate height by a factor of 4.6 and lowered the peak skew by a factor of 1.3. A similar trend was observed for the small, inorganic ion nitrite. Furthermore, a fluorescent and electrochemically active amino acid derivative was used to directly compare the separation performance of in-channel EC detection to that of a widely used laser-induced fluorescence (LIF) detection scheme. In this case, it was found that the plate height and peak skew for both detection schemes were essentially equal, and the separation performance of in-channel EC detection is comparable to LIF detection.

Polymer microchip impedance spectroscopy through two parallel planar embedded microelectrodes: Understanding the impedance contribution of the surrounding polymer on the measurement accuracy

“…However, electrochemical detection (ECD) offers specific advantages for microfluidic systems due to its small size, portability, low cost, high sensitivity, and high selectivity using a proper choice of detection potential and/or electrode material [8]. An additional advantage of ECD is the simplicity of the instrumentation, resulting in low electrical power requirements for in-field use [9][10][11][12]. Electrochemical impedance spectroscopy (EIS) is a sensitive analysis method for biological samples [13][14][15][16].…”

Bioanalytical profile of the l-arginine/nitric oxide pathway and its evaluation by capillary electrophoresis

“…There is one repot of contact-less integrated ECD with independent battery power and optical communication interface [324].…”

“…Interesting design of inchannel ED for microchip HPCE which uses optically isolated RS-232 port has recently been published by Martin et al [324,366]. Optimization of separation/recordings with CEECD yields overall LOD values for different analytes in the 10 −6 -10 −7 M range.…”

On‐column conductivity detection in capillary‐chip electrophoresis

“…Different electrochemical detection methods have been proposed for CE, either amperometric or potentiometric with the electrodes being located either at the end of the column or directly in or on the column. In-or on-column methods are superior for maintaining the separation power of CE, and are easier to integrate for chip electrophoresis, as it is possible to integrate the detection electrodes during the microfabrication process [7,8]. The electric coupling of the high voltage necessary for the electrophoretic separation and the low electric signals used for the electrochemical detection has been a major technological hurdle and has limited the wider development and applications of electrochemical detection.…”