Induced over voltage test on transformers using enhanced Z-source inverter based circuit

Abstract

The normal life of a transformer is well above 25 years. The economical operation of the distribution system has its roots in the equipments being used. The economy being such, that it is financially advantageous to replace transformers with more than 15 years of service in the second perennial market. Testing of transformer is required, as its an indication of the extent to which a transformer can comply with the customers specified requirements and the respective standards (IEC 60076-3). In this paper, induced over voltage testing on transformers using enhanced Z source inverter is discussed. Power electronic circuits are now essential for a whole array of industrial electronic products. The bulky motor generator set, which is used to generate the required frequency to conduct the induced over voltage testing of transformers is nowadays replaced by static frequency converter. First conventional Z-source inverter, and second an enhanced Z source inverter is being used to generate the required voltage and frequency to test the transformer for induced over voltage test, and its characteristics is analysed.

A Real-Time Implementation of Air Audit System for Compressors towards Energy Conservation: An Industrial Case Study

“…us, Li-ion is the obvious choice considering its high energy density and almost zero memory effect. A Li-ion battery typically provides 3.6-3.7 V. Two 18650 Li-ion batteries with required mAh power the air audit system [12][13][14].…”

Optimization and Design of a Sustainable Industrial Grid System

“…Voltage drop happens when load current (I b ) flows through a conductor or transformer having a finite impedance. Severe voltage drops will result in motor failures, dimming of lamps, and CPU shutdown [4]. Voltage drop calculation is important to the system for maintaining the nominal voltage at service sides.…”

Review of Partial Discharge Activity Considering Very-Low Frequency and Damped Applied Voltage

“…On the other hand, the supply frequency is enhanced when the test object is prevailingly inductive [5]. For instance, transformer windings are often tested in the frequency range of 100-400 Hz to avoid core saturation at power frequency during the test [7,8].…”