Integration of Thin Film Strain Sensors Into Hard Drives for Active Feedback Vibration Suppression

Abstract

The work described in this paper demonstrates a novel application of piezoelectric thin-film sensing technology by incorporating ZnO strain sensors into a hard disk drive (HDD) and deploying the sensors in a high-sample-rate feedback controller to suppress vibrations. First, thin-film ZnO sensors are fabricated directly onto a HDD suspension component, which was a unique and challenging process since the substrate is steel. The sensor geometry is designed to be selective to vibration modes that contribute to displacement in the off-track direction. The smart suspension structure is then packaged into an experimental HDD, along with a miniaturized conditioning circuit and lead zirconate titanate (PZT) actuation elements. The sensors demonstrate excellent sensitivity and selectivity to the desired modes. Finally, an active mode damping controller is implemented on the instrumented, PZT-actuated prototype. Feedback control using the thin film sensors effectively suppresses the high-frequency sway mode of the suspension.Index Terms-Hard disk drive (HDD), piezoelectric thin films, smart structures, vibration control.

MetaMembranes for the Sensitivity Enhancement of Wearable Piezoelectric MetaSensors

“…The peak stress of 6.64 MPa, 4.98 MPa, and 4.56 MPa were observed in the hexagonal MPS, kirigami MPS, and CPS, respectively. It is worth mentioning that these stress values are sufficiently below the yield strength of both PVDF and PC (30-80 MPa) [46][47][48]. The membrane/MetaMem transfers the stress of the applied bending over the PVDF.…”

Electric-Force Conversion Performance of Si-Based LiNbO3 Devices Based on Four Cantilever Beams

“…The piezoelectric cantilever beams are critical in designing intelligent systems [1][2][3] as the primary structure of sensors. The cantilever beam structures [4], characterized by wide operating bandwidth, lightweight, powerful driving force, and high electromechanical conversion efficiency, have been used in the fields of micrometer/nanomechanical systems [5][6][7], server hard disk failure detection [8,9] and controller model validation [10,11]. Therefore, the modeling analysis and dynamic motion behavior of piezoelectric cantilever beams have attracted significant works in the literature [12,13].…”