Investigating system performance in 16 channel WDM network at minimum attenuation window for pre-defined input noise level

Abstract

Input and output optical signal-to-noise ratio in 16-channel WDM network are investigated for predefined input noise level when design is set at minimum attenuation window. By keeping the input OSNR constant, gain and noise figure are computed along with SNR at both transmitting and receiving terminals for two different data rates and also with short-to-long range of trans-receiver distance. Corresponding variations of all the network properties, i.e., maximum Q-factor, eye height and noise figure are measured for estimation of performance degradation. Optimization in terms of both bit rate and channel distance is required, as evident from simulation result, for best possible system performance. Setting up of input noise level at 20 dBm indicates the fact of real-time compatibility with optimum value of output OSNR is revealed at a particular distance, which suggests the best result for communication system design.