IoT based Standard Water Measuring System using GSM

Abstract

Water pollution is one of the problems in the world. Water is used for industrial purpose. So, it is compulsory for an each officer to visit the ponds at a designated time and perform manually testing to measure the purity level of the water. The industrial visitors are not come directly to the pond and the information about the water to send the Short Message Service (SMS). A pond is a body of standing water, either natural or artificial. The sensor is fixed to the pond water, it senses the water and the data will be collected through these phase pH meters, humidity and temperature sensor is sending the signal to Arduino microcontroller. pH meter is used to measure the hydrogen ion in the water, temperature sensor will sense the temperature is one of the most frequently calculated variables and sensing can be made either through straight contact with the heating basis without straight contact with the basis using radiated energy in its place. Humidity is used to measure the amount of water present in the air. The GSM module sends the message to industrial visitor. The pH is normal or abnormal and humidity value, temperature value. The motor is fixed in the pond and if industries need water then they can switch on (or) off the motor. The motor can be switched on (or) off using microcontroller.