LA-ICP-MS analysis of trace and rare-earth element distribution in calcite fracture fillings from Forsmark, Simpevarp and Laxemar (Sweden)

Abstract

Concentrations and spatial distribution of trace elements in secondary minerals provide valuable information about mobility controlling processes in natural fractures. Important examples include rare-earth element contents that act as analogues for the retention of trivalent actinides such as Am/Cm or Pu(III). The secondary phases (carbonates) investigated in this study originate from exploration drilling bore cores of the Swedish Nuclear Fuel and Waste Management Company SKB (Forsmark, Simpevarp and Laxemar, Sweden).Here, high-resolution element analysis (Micro-X-ray Fluorescence-Spectrometry (µXRF) and Laser Ablation-Inductively Coupled Plasma-Mass Spectrometry (LA-ICP-MS)) is applied to scan for Na and the trace elements Mn, Fe, Sr, Pb, Th and U as well as the rare-earth elements Y, La, Ce and Yb associated with carbonate fracture fillings. High resolution element maps highlight growth zones and microstructures within the samples, which are not detected by the usual point and line measurements. Evidence of phase-dependent partitioning is observed.The partition coefficients, D, determined from formation water and carbonate data were compared to experimentally generated coefficients and values derived from a 17-year precipitation experiment carried out at the Äspö Hard Rock Laboratory (HRL).Distribution coefficients of the light rare-earth elements La and Ce have been found to be relatively high in the studied samples, whereas the coefficients of distribution of Sr and U are remarkably low.Overall, the results of this work show that the secondary calcite formed in deep granitic fractures coprecipitated periodically with significant amounts of radionuclide analogues (i.e., rare-earth elements).